Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
Q-2, r. 38 - Regulation respecting the quality of the atmosphere
Schedule
Disposition versions
SCHEDULE A
(s. 24)
(Replaced, O.C. 501-2011)
process weight emission standards
rate (tonnes/h) kg/h
0.50 1.3
1.00 2.0
1.50 2.6
2.00 3.2
2.50 3.7
3.00 4.2
3.50 4.6
4.00 5.1
4.50 5.5
5.00 5.9
6.00 6.6
7.00 7.4
8.00 8.1
9.00 8.7
10.0 9.4
12.0 10.6
15.0 12.3
17.0 13.3
20.0 14.9
22.0 15.8
25.0 17.2
27.0 17.5
30.0 18.0
35.0 18.6
40.0 19.1
45.0 19.6
50.0 20.0
60.0 20.8
70.0 21.5
80.0 22.1
90.0 22.6
100 23.0
150 25.0
200 26.4
250 27.5
300 28.4
350 29.2
400 29.9
450 30.6
500 31.1
550 31.6
600 32.1
rate (tonnes/h) kg/h
0.50 1.3
1.00 2.0
1.50 2.6
2.00 3.2
2.50 3.7
3.00 4.2
3.50 4.6
4.00 5.1
4.50 5.5
5.00 5.9
6.00 6.6
7.00 7.4
8.00 8.1
9.00 8.7
10.0 9.4
12.0 10.6
15.0 12.3
17.0 13.3
20.0 14.9
22.0 15.8
25.0 17.2
27.0 17.5
30.0 18.0
35.0 18.6
40.0 19.1
45.0 19.6
50.0 20.0
60.0 20.8
70.0 21.5
80.0 22.1
90.0 22.6
100 23.0
150 25.0
200 26.4
250 27.5
300 28.4
350 29.2
400 29.9
450 30.6
500 31.1
550 31.6
600 32.1
N.B. The process weight rate is determined by the total weight of all materials introduced into any process for a specified period of time. For the purpose of this Schedule, solid fuels are considered part of the process, but liquid and gaseous fuels and combustion air are not.
Interpolation of the data in this Schedule for process weight rates under 25t/h shall be accomplished by use of the equation E = 2,0p0.67 and interpolation and extrapolation of the data for process weight rates equal to or in excess of 25 t/h shall be accomplished by use of the equation E = 25,0p0.11--18, where E is the emission standard in kg/h and P is the process weight rate in t/h.
In the case of discontinuous operation of the process, the rate is calculated by dividing the total process weight rate by the number of hours of complete operations, less the time during which the equipment was not in operation. The process weight rate per hour is then calculated by dividing the process weight rate for a typical period of time by the number of hours of such period.
